Ghost Immobiliser Fitting
Secure your vehicle from key theft hacking, cloning, and theft with the first aftermarket CAN immobiliser. With the option to link to a Ghost app and GPS tracking system, which can send you alerts to call in the event that your vehicle is damaged with or stolen.
The installation of a Ghost immobiliser can be done by a trained technician. Making use of the correct tools, insulation tape, and heat shrink tubing is essential.
Getting Started
Ghost immobilisers are a great alternative to physical theft protection devices like wheel locks and car alarms. They guard your vehicle without using LED indicators or key fobs. Instead, they connect directly to the ECU's CAN data network. They will only start after entering a PIN code sequence. This provides a much more secure level of security against key hacking, cloning and even ECU swapping.
In the end, installing a ghost immobiliser Birmingham must be completed with great agility and precision. It's like walking through a minefield. A mistake could result in serious damage to your vehicle's circuits. To avoid this, it's vital that you understand the process of installation and prepare your vehicle for the installation process.
First, you must prepare the vehicle by taking out interior panels to make space for the immobiliser device. Once you've found the ideal location to hide it put it in place by using cable ties to stop it from being removed or altered. Then, tidy your wiring by connecting loose wires and using insulation tape to cover the exposed connections. This will help to reduce the risk of short circuits that are not intended to be there while also improving the appearance and reducing the likelihood of tampering by thieves.
Finally, identify a source of continuous 12V power as well as a grounding point for the ghost immobiliser. Once you've found these, test the power wires using a multimeter to ensure they're delivering the same voltage. Connect conversational tone and L wires from the immobiliser to your chosen power source and the grounding point.
Once you've made all of the connections required, it's important to double-check the connections and check the immobiliser for indications of corrosion or damage. The process of entering a PIN and launching the car is a good method of testing the system. This should become a part of your daily routine, as it will allow you to detect any issues that may arise early. Regular testing also helps to extend the life of the device and ensure that it is running at its peak performance.
Preparing the Vehicle
Installing a Ghost immobiliser is a process that requires skills and knowledge. A wiring diagram of the vehicle is crucial to identify the proper wires and establishing precise connections. A multimeter can be used to verify the electrical properties and ensure security. Cable ties and insulation tape can be used to shield connections from being tampered with and to keep them neatly secured. A user's manual is provided for your Ghost Immobiliser. It will give you specific instructions specifically tailored to the model.
Once installed the ghost immobiliser can prevent unauthorised engine starts by requiring the owner to enter a unique code sequence using the buttons on the console or steering wheel. This can be done manually or remotely via an app for mobile phones, and the code is able to be changed by the vehicle owner at anytime. The device is also silent and is inaccessible to thieves because it doesn't emit radio frequencies.
A ghost immobiliser is connected to the CAN bus of the vehicle, which is a network that communicates with the electronic control units (ECUs) of the vehicle. It intercepts the signals transmitted by ECUs, and blocks the engine when a false signal is detected. The system is tamper-proof and weatherproof, with no LED indicators or key fobs to draw the attention of thieves.
It can be placed behind or in a less visible area to ensure that it isn't obvious to thieves and won't hinder vehicle performance. It can even be mounted in a small container and makes it less likely to be discovered during a test drive by unscrupulous salespeople for cars.
Its stealthy operation, along with its integration into the vehicle's CAN-bus system, is an effective deterrent to vehicle theft techniques, such as signal relay attacks and key cloning. Combining the system with other security measures will create a powerful barrier to frustrate even the most persistent of thieves. This is why more and more insurance companies are recommending or even requiring ghost immobilisers to be installed, since they can drastically reduce the cost of insurance.
Making the Connections
Ghost immobilisers are silent unlike traditional security systems, which can be heard by thieves. They prevent thieves from knowing that your car is in operation. They also stop high tech methods of theft, such as OBD hacking. They can also be fitted without leaving permanent marks on your vehicle, making them an excellent option for those planning to sell their vehicle in the near future.
The Autowatch Ghost 2 is a immobiliser CANbus that is among the most reliable and modern solutions to stop car theft. It utilizes the CAN data network to shut down your engine and generates a PIN code that only you know, which means it is difficult for thieves to identify. It can be fitted in many vehicles and is compatible with a variety of existing features, including car alarms, GPS trackers, steering wheel locks, and door bypass systems for locks.
If you decide to go with an Ghost immobiliser, be sure to refer to the wiring diagram for your specific car model to identify the wires that need connecting. Double-check their locations to ensure they're correct, and then label them or tape them to help keep track of them. You'll also need to locate a source of continuous power (12V) and a grounding point for the system. Once you have these in place, you can start making the connections to complete the installation.
The ghost immobiliser will not allow your vehicle to start unless a pin code is entered through the buttons of the steering wheel or dashboard. This will stop ECU cloning and other methods of stealing vehicles. It can also be combined with other Thatcham approved security accessories such as alarms and tyre clips to give your vehicle an even greater security level.
As the UK automotive industry continues to expand, as do the options available for securing your vehicle. There are a myriad of ways for thieves to gain access into your car and steal it, so it's important to take every precaution to prevent it from being taken. Ghost immobilisers are a popular choice among car owners who are accountable.
Testing the System
The Ghost Immobiliser communicates with the vehicle's ECU using a CAN network. This prevents the engine from starting until the PIN code has been entered. This makes it very difficult for thieves to copy the key fob of your car and start your vehicle, and more difficult to disable the system by hacking into its electronics.
Ghost Immobilisers can also be used with GPS tracking devices to assist you to locate your vehicle in the event that it is stolen. This feature is not an everyday feature in aftermarket security solutions, but it's a great option to increase your security and give you peace of mind knowing your vehicle is always secure.
The Ghost-II immobiliser not only provides enhanced security but also a convenient experience for the user, by not having to use additional key fobs or devices. It features a simple, intuitive PIN code entry that can be integrated seamlessly into your daily routine. It also offers convenience features and deactivation settings that allow you to temporarily disable the immobiliser to valet park or service your vehicle.
Make sure you have the tools you need and become familiar with the wiring of your vehicle. A basic set of hand tools will allow you the ability to make precise connections, and a multimeter is a great tool to check electrical values. Insulation tape and heat-shrink tubing are vital to safeguard connections from short circuits. Cable ties can also be used to secure wiring. It is also essential to work in a well-lit area and wear appropriate safety gear when working with electrical tools and components.
After you've completed the installation you must test the Ghost immobiliser to make sure that it's working as intended. The first step is to start the vehicle without entering the PIN code. If this fails, you will need to retest and inspect the connections more thoroughly.
The Ghost Immobiliser, unlike other security systems, is a hidden device which cannot be detected by thieves. It is also more efficient than physical deterrents, such as wheel clamps and steering locks. It is TASSA-approved and endorsed by a few insurance companies. This makes it a cost-effective investment that gives you the peace of heart you deserve.