The Ghost Immobiliser
Immobilisers are a potent weapon in the fight against car theft. They prevent vehicles from being started without a key fob, and can be used to stop hotwiring and other traditional methods of vehicle theft. However, newer techniques like key replication and relay theft are becoming more common.
Created to counter these current trends, the ghost immobiliser works to make your vehicle inaccessible. conversational tone doesn't use LED indications radio signals, key fobs. It is quiet and discreet.
Easy to install
The Ghost Immobiliser is a revolutionary device that connects to the CAN data network inside your vehicle to prevent key cloning and theft. It is a TASSA approved product and has been recognized by insurance companies. It operates silently and is almost undetectable to thieves. It makes use of buttons on your steering wheel and center console to generate an individual pin-code sequence you must enter before you can begin the vehicle. You can create up to 20 different sequences to increase security. The system is easy to install and doesn't require any additional hardware.
It is recommended to use an accredited immobiliser CAN installer who is specialized in the specific type of vehicle you have to ensure the most effective results. It is ideal if they have a workshop located in your area that allows you to visit and have the installation completed. There is also various tools and materials that will aid you in the installation. They will have basic hand tools, a multimeter, and insulation tape and heat shrink tubing to protect the connections. A user manual will give you the necessary instructions for your vehicle's wiring.
Before beginning the installation Before beginning the installation, disconnect the battery to avoid short circuits and airbag deployment. It is essential to verify the exact location of the CAN H and L wires, since incorrect identification could lead to improper system integration. It is also a great idea to label or mark the wires. Finally, use a multimeter to verify that the identified power source provides a consistent 12V supply.
Advanced thieves may employ various methods to evade Ghost Immobilisers, including jamming or spoofing. These techniques work by amplifying the signal transmitted from your key fob to the electronic control unit in your vehicle. With advanced anti-jamming technologies and a constant monitoring system, your vehicle can be protected from these sophisticated attacks.
Security Improved
A ghost immobiliser offers an additional layer of security to safeguard your car from theft. It uses an PIN protection system that is entered using buttons on your steering wheel or dashboard which makes it more difficult for thieves to take your vehicle. The device is designed to be hidden within your vehicle. It doesn't have any LEDs, or other signals to alert a potential burglar to its presence. It communicates with your car's ECU on the data bus, so it is not susceptible to the same hacking and relay attacks that can disable conventional security systems.
It's a fantastic investment for those with high-end vehicles, which are at higher chance of being stolen due to their value and the popularity of their vehicles. Its enhanced security features guard against key cloning, ECU swapping, and other threats to your vehicle's security. Some ghost immobilisers are also integrated with apps, meaning you can arm and dearm quickly. They also come with the option of a service/valet mode, which allows you to temporarily deactivate them while your vehicle is being repaired or serviced.
Another great feature of ghost immobilisers is that it doesn't require any wire cutting. This is a great option, particularly if you have a newer car which does not come with immobiliser built-in technology. Certain systems might also be capable of integrating with an GPS tracking device, which can provide additional security for your vehicle. Having a GPS tracker can also help you reduce the cost of insurance. If you choose to buy an immobiliser that is ghost, make sure it is TASSA-verified and that an experienced installer installs the device for you.
Compatible with all major brands and models
The Ghost Immobiliser has been designed to work with all major makes and models of vehicle, safeguarding your vehicle from theft. It creates a unique pin code using buttons on your steering wheel, console, or door panels. You must enter this code before you can drive. have a peek at this site is secure and undetectable. ghost immobiliser tracker is also backed by three-year warranty. It is also fully certified by insurance providers This means that it could help reduce your premiums.
Unlike standard immobilisers, which make use of your key fob to control the ignition of your car, the Ghost system operates by directly connecting to the engine controller unit using the CAN data bus. It is nearly impossible to disable, remove or hack. The Ghost system can also be paired with an iPhone app to allow remote monitoring and management.
You can design an PIN that is easy to remember, but mathematically impossible to guess for thieves. The PIN can be personalized and changed at any point, so you can keep your car safe even when you park it on the street or in a parking lot. You can also choose a valet or service mode in case you need someone who is not driving your car for a brief period for instance, when you're in the garage for servicing. This feature is also a great way to prevent your vehicle from being taken by a scammer mechanic. To ensure your peace of mind you can choose a Ghost call alert that will notify you if your car is moving or if it has been moved.
Convenience
The ghost immobiliser is a highly effective security system, securing your vehicle from typical methods of theft such as key cloning and relay attacks. It works by connecting with the vehicle's data network CAN, and blocking communication with engine ECU. This makes it impossible for thieves to copy or hack your car, making the installation of this system a great idea for all drivers.
Once installed, you will be required to enter a PIN number up to 20 digits long using the buttons on your dashboard or steering wheel to start the engine. The system is completely concealed and thus unnoticeable to thieves. It doesn't emit radio frequency signals. It can also be configured to allow change the PIN of the user, which further enhances its security. The system is designed to stop circuit-cutting, making it almost impossible to hack.
Certain systems let you connect directly to the immobiliser through an app on your phone, disarming it immediately when you forget your PIN. Some systems even have a valet/service setting that allows you temporarily to start your car for example when you drop it off at a garage or valet park.
The Ghost Immobiliser also is undetectable by thieves, since it transmits no radio signals. This is a significant benefit over other aftermarket security systems. It is also simple to use, and doesn't require any complicated wiring. You can also use it together with a dash cam to provide additional security. Dash cams include the Thinkware F70, which features clear & sharp 1080p HD dashcam footage, Format Free Technology and parking mode. The system can be hardwired to guarantee maximum performance and longevity.
Installation
It is essential to select the most reliable immobiliser ghost in order to shield your vehicle from thieves. This device will help to in preventing theft of your car by blocking the communication between the engine controller unit (ECU) and key fobs. This stops thieves from stealing the signal and then cloning the key fob to begin your vehicle. It also detects the moment it has been altered with and alert the owner of the vehicle.
The device is simple to install and can be integrated with the existing systems in your vehicle. It doesn't require any modifications to the wiring of the vehicle and can be installed in a hidden location, like under the dashboard. To ensure that the device has been correctly installed, follow the instructions in the manual for the user. After installation, it is important to test the system. This will confirm that the immobiliser ghost works exactly as it was intended to.
You can purchase an Autowatch Ghost 2 immobiliser and have it installed by a certified installer. The installer will connect Ghost to your vehicle's CAN Bus system, making it harder for thieves to remove the system or bypass it. The installation process typically takes about 2 hours.
It is recommended that you consult the wiring diagram of your vehicle prior to the installation process. This will allow you to locate the CAN High and the CAN Low wires that are required to connect your Ghost to the engine of your vehicle. Make sure to double-check the connections to ensure they are secure and insulated.
Once the installation is completed, you can use the Ghost Immobiliser in normal operation. It will shut off your vehicle's ignition if it is not started with the correct PIN, which you can assign yourself. The immobiliser ghost can be set to Service/Valet Mode if you require your vehicle to be cleaned or valet parking.